Dayton Audio RS75-4 - center dash
Regular price
$45.00
Sale price
$45.00
Regular price
PRODUCT DESCRIPTION
- Price is for a pair
- Comes fully assembled and ready to go, no audio legos here.
| Brand | Dayton Audio |
| Model | RS75-4 |
| Part Number | 295-380 |
| UPC | 844632086281 |
| Unit of Measure | Each |
| Weight | 0.6 |
Product Specifications |
|
|---|---|
| Nominal Diameter | 3" |
| Bolt Circle Diameter | 2.52 |
| Power Handling (RMS) | 15 Watts |
| Power Handling (MAX) | 30 Watts |
| Impedance | 4Ω |
| Frequency Response | 170 to 20,000Hz |
| Sensitivity | 85.2dB 2.83V/1m |
| Voice Coil Diameter | 0.63" |
Thiele-Small Parameters |
|
|---|---|
| Resonant Frequency (Fs) | 177Hz |
| DC Resistance (Re) | 3.1Ω |
| Voice Coil Inductance (Le) | 0.72mH |
| Mechanical Q (Qms) | 5.76 |
| Electromagnetic Q (Qes) | 0.97 |
| Total Q (Qts) | 0.83 |
| Compliance Equivalent Volume (Vas) | 0.005ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.72mm/N |
| BL Product (BL) | 2.01T·m |
| Maximum Linear Excursion (Xmax) | 1.1mm |
| Surface Area of Cone (Sd) | 12cm² |
Materials of Construction |
|
|---|---|
| Cone Material | Aluminum |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
QUESTIONS FROM OUR CUSTOMERS
Q: What are the compatible speaker sizes for the B9 Audi A4/A5 Series?
A: Typically, the front and rear doors accommodate 6.5-inch speakers, but it's recommended to check your specific model for exact sizing.
Q: Are these speakers compatible with the factory audio system?
A: Yes, our speaker replacements are designed to work seamlessly with the B9 Audi A4/A5 Series factory audio systems.
Q: Do I need professional installation for these speakers?
A: While professional installation is recommended for optimal results, our speakers come with detailed manuals to assist enthusiasts in a DIY installation.
Q: What is the power handling capability of these speakers?
A: Each speaker was chosen to match the output of the OEM component and leave some RMS in reserve in case of an aftermarket amplifier is added down the line.
Q: Are these speakers suitable for both front and rear locations?
A: In terms of size, yes. In terms of impedance, no. Front units are 8 ohms and rears are 4 ohms.